ROWELD P 250A súprava, 230V
The P 250A for use on the construction site and in the workshop. It is particularly suitable for sanitary installations in the drainage area and for chimney pipe rehabilitation with PVDF pipes.
- Flexible for difficult positions due to removable heating element
- Protection against unintentional starting and jumping out of the milling device
- Milling possible on one and both sides
- Torsionally stiff, for minimum drag pressure and low-loss power transmission
- Precise welding force adjustment due to clear force scale
- Safe, torsionally rigid transfer of welding forces
- Always available stable work table
Vybraný variant
Kúpiť online
Nájdite predajcu vo svojom okolí
Vyberte si predajcu prostredníctvom
Popis produktu
The P 250A plastic pipe welding machine is the all-rounder on the construction site and in the workshop. It is particularly suitable for sanitary installations in the drainage area as well as for chimney pipe rehabilitation with PVDF pipes.
Funkcie a vlastnosti
110 V striedavý prúd
115 V striedavý prúd
230 V striedavý prúd
230 V striedavý prúd
Rozsah dodávky
- ROWELD P250A Bare tool with Planer
- P250A Heating Element
- Basic Clamping Jaw Set 250 mm
- Basic Clamping Jaw Set, 160 mm
- Reducer Clamping Insert 40 mm
- 50 mm reduction clamping insert
- 56 mm reduction clamping insert
- 63 mm reduction clamping insert
- 75 mm reduction clamping insert
- 90 mm reduction clamping insert
- 110 mm reduction clamping insert
- 125 mm reduction clamping insert
- 140 mm reduction clamping insert
- 180 mm reduction clamping insert
- 200 mm reduction clamping insert
- 225 mm reduction clamping insert
- Support fork insert 40/125 mm
- Support fork insert 50/110 mm
- Support fork insert 56/90 mm
- Support fork insert 63/75 mm
- Support fork insert 140 mm
- Support fork insert 180 mm
- Support fork insert 200 mm
- Support fork insert 225 mm
- 6 mm hex key
- Hex key, size 8 mm
- Open-end wrench, size 17 mm
- Data disc
- Instruction manual
- Service Manual
Technické údaje
Najdôležitejšie fakty v skratke
| Vstup | 0 – 1.500 W |
| Napätie | 230 V |
| Priemer pracovnej plochy mm | 40 - 250 mm |
| Pracovná plocha Teplota | 160 – 285 °C |
| Vhodné Matrialias | PE, PP, PVDF |
| Typ zástrčky | Zástrčka typu F (CEE 7/4) |
| Dokumentácia | Nie |
| Sieťová frekvencia s mera jednotkou merania | 50/60 Hz |