Produkty/Instalace/Ohýbání/Ohýbací stroje

{Label}

The ROBEND 4000 E bending machine is suitable for bending copper, stainless steel and carbon steel pipes in the dimensions 12-35 mm (1/2-1.3/8 inch) with a maximum bending radius of 180°. The brushless motor ensures a longer service life and less wear and tear on the machine. The tool-free pre-setting of the bending angle and the automatic switch-off when the desired bending angle is reached make the ROBEND 4000 E perfect for series production. Deformation- and crease-free bending is guaranteed by the patented ROLUB technology. 60 bends are possible with the 18 V battery. Faster and more precise work is guaranteed by the simple handling.

Vybraná varianta:{Label}
Číslo článku:1000003392
Vyberte jinou variantu
  • Tool-free pre-adjustment of bending angle
  • Automatic switch-off when reaching the preset bending angle - ideal for fast batch production of bends
  • Deformation- and ripple-free bending by using the patented ROLUB technology for better gliding of the bending shoe
  • No search for a power outlet on the jobsite necessary
  • CAS battery for up to 60 bends of 28 mm copper pipe    

  • ROBEND 4000 E bare machine

    ROCASE 6427 with inlay for ROBEND 4000 E

    Bending set 15 mm

    Bending set 18 mm

    Bending set 22 mm

    Bending set 28 mm

    ROCASE 4212, with inlay for 2x battery, 1x battery charger

    RO BP18/4, 4.0 Ah 18 V Li-Power battery

    RO BC14/36 battery charger, 230 V, EU

    Tripod

    Guide shoe axle

    Instruction manual

Výběr varianty

{Label}

1000003392

ROBEND 4000 E bare machine

ROCASE 6427 with inlay for ROBEND 4000 E

Bending set 15 mm

Bending set 18 mm

Bending set 22 mm

Bending set 28 mm

ROCASE 4212, with inlay for 2x battery, 1x battery charger

RO BP18/4, 4.0 Ah 18 V Li-Power battery

RO BC14/36 battery charger, 230 V, EU

Tripod

Guide shoe axle

Instruction manual

{Label}

1000003391

ROBEND 4000 E bare tool

Tripod

Sliding shoe axle

Operating instructions

ROCASE 6427

 

{Label}

1000003394

ROBEND 4000 E base machine

ROCASE 6427 with inlay for ROBEND 4000 E

Bending set 1/2

Bending set 5/8"

Bending set 3/4"

Bending set 7/8"

Bending set 1.1/8"

ROCASE 4212, with inlay for 2x battery, 1x battery charger

RO BP18/4, 4.0 Ah 18 V Li-Power battery

RO BC14/36 battery charger, 230 V, EU

Tripod

Guide shoe axle

Instruction manual

{Label}

1000003399

ROBEND 4000 E bare machine

Bending set 1/2"

Bending set 5/8"

Bending set 3/4"

Bending set 7/8"

Bending set 1.1/8"

ROCASE 4212, with insert for 2x battery, 1x charger

RO BP18/4, 4.0 Ah 18 V Li-Power battery

RO BC14/36 charger, 230 V, AUS

Tripod

Sliding shoe axle

Operating instructions

ROCASE 6427