CONJUNTO ROWELD P 250A, 230V
P 250A Set consisting of: Basic machine with electric planer, heating element holder, electronically controlled heating element, basic clamping sets Ø 160 mm and Ø 250 mm, supporter Ø 160 mm and 250 mm, reduction clamping and supporter inserts from Ø 40 - 140mm and Ø 180 - 225 mm. Assembly tool, steel transport case 800 x 520 x 765 mm (L x W x H) and steel case for reduction and supporter inserts.
- Flexible for difficult positions due to removable heating element
- Protection against unintentional starting and jumping out of the milling device
- Milling possible on one and both sides
- Torsionally stiff, for minimum drag pressure and low-loss power transmission
- Precise welding force adjustment due to clear force scale
- Safe, torsionally rigid transfer of welding forces
- Always available stable work table
Opção selecionada
Comprar online
Encontre um revendedor perto de você
Selecione um revendedor através do
Descrição do produto
P 250A Set consisting of: Basic machine with electric planer, heating element holder, electronically controlled heating element, basic clamping sets Ø 160 mm and Ø 250 mm and supporters Ø 160 mm and 250 mm, reduction clamping and supporter inserts from Ø 40 - 140 mm and Ø 180 - 225 mm. Assembly tool, steel transport case 800 x 520 x 765 mm (L x W x H) and steel case for reduction and support fork inserts.
Funções e caraterísticas
230 V CA
Itens inclusos
- ROWELD P250A Bare tool with Planer
- P250A Heating Element
- Basic Clamping Jaw Set 250 mm
- Basic Clamping Jaw Set, 160 mm
- Reducer Clamping Insert 40 mm
- 50 mm reduction clamping insert
- 56 mm reduction clamping insert
- 63 mm reduction clamping insert
- 75 mm reduction clamping insert
- 90 mm reduction clamping insert
- 110 mm reduction clamping insert
- 125 mm reduction clamping insert
- 140 mm reduction clamping insert
- 180 mm reduction clamping insert
- 200 mm reduction clamping insert
- 225 mm reduction clamping insert
- Support fork insert 40/125 mm
- Support fork insert 50/110 mm
- Support fork insert 56/90 mm
- Support fork insert 63/75 mm
- Support fork insert 140 mm
- Support fork insert 180 mm
- Support fork insert 200 mm
- Support fork insert 225 mm
- 6 mm hex key
- Hex key, size 8 mm
- Open-end wrench, size 17 mm
- Data disc
- Instruction manual
- Service Manual
Dados técnicos
Destaques do produto
| Potência de entrada (min-max) | 0 – 1,500 W |
| Tensão (min-max) | 230 V |
| Diâmetro da área de trabalho mm (min-max) | 40 - 250 mm |
| Área de trabalho Temperatura (min-max) | 160 – 285 °C |
| Matrialias adequadas | PE, PP, PVDF |
| Frequência da rede com unidade de medição | 50/60 Hz |