Soldering and welding

• Extreme flame temperatures up to 2,700 °C for highest firing rates and short processing times
• Excellent heat transfer, faster than propane, even in winter below 0° C
• Provides high flame performance in any position, even overhead (360°)

Very high flame temperatures up to 2,200° C for versatile use After finishing the work, the cartridge can be easily separated from the soldering burner, the cartridge valve seals completely.

• Extreme flame temperatures up to 2,700 °C for highest firing rates and short processing times
• Increased safety due to aluminium monobloc cartridge without additional welding seams

• Wind-stable soft flame for shrinking up to 300 mm diameter
• Working temperature up to 720 °C
• Twist 'N' Load" system - quick assembly and replacement of the burner with only one hand movement

• Precise, powerful and stable flame for soft soldering and other work with lower heat input
• Working temperature up to 700 °C for extensive soft soldering work
• Twist 'N' Load" system - quick assembly and replacement of the torch with only one handle

• Precise and stable flame for fine soft soldering work
• Working temperature up to 460°C
• ,,Twist ,N' Load"-System - quick assembly and replacement of the torch with just one hand movement

• Highly efficient burner heads with flame stabiliser, made of chrome-plated special steel (edge-reinforced)

• Highly efficient burner heads with flame stabiliser, made of chrome-plated special steel (edge-reinforced)

• Higher flame temperature due to turbine with increased air-oxygen intake capacity and 4 to 5 time flame drill
• Quick and tool-less change of burner

• Breite Bauform, auch für größere Rohrdurchmesser
• Erwärmung der Weichlötstelle ohne offene Flamme - keine Brandwache nötig

• 10 different key sizes
• Steel, galvanised

• Robust metal box
• Long service life due to powder coating
• Accommodation of complete RE 17 tube welding set & accessories
• Many holding devices for torches and accessories

• Oxygen and liquid gas hose assemblies with union nuts and single pipe clamps as replacement for ROXY 400 L
• With backflow preventers

• High flame temperatures up to 3,100 °C for ambitious brazing work and many other applications
• Powerful, focused flame for precise work
• Included safety devices reliably prevent flame flashbacks
• Maximum mobility thanks to compact and very light design

• Robust steel case with carrying handle
• Powder coated for long life
• Integrated cylinder holders for propane and oxygen
• Protection for pressure reducer, can remain connected during transport (depressurised)
• Lid can be detached from the carrying frame

• Robust RE 17 pipe welding set for extreme requirements
• Universal application possibilities due to extensive torch range, also with flexible welding inserts for hard-to-reach places
• Three-gas system consisting of acetylene, oxygen and Maxigas 400: welding and cutting is done with acetylene and oxygen, brazing alternatively with Maxigas 400 and oxygen

• Handle for the robust RE 17 tube welding set for extreme requirements
• Universal application possibilities due to extensive torch range, also with flexible torch inserts for hard-to-reach places

Can be used with all common fuel gases and cylinder oxygen

• High quality brass union nut for ALLGAS 2000 nozzle mixing tube

• Flexible welding inserts for hard-to-reach places
• Handle for the robust RE 17 pipe welding set for extreme requirements

• Durable brass construction
• Smooth-running regulating valves

• Special welding inserts for material thicknesses up to 14 mm

• Robust pipe welding and cutting set for extreme requirements
• Universal application possibilities due to extensive torch range, also with flexible welding inserts for hard-to-reach places

• Precise soldering due to focused flame with high intensity

• Quality soft solders according to ISO 9453

• Wide effective temperature range from 500 - 800 °C for excellent flow properties
• DVGW-tested: DV-0101 AT 2245 (FI 032)

• Brazing flux in long-life powder form
• Also suitable for welding brass

• Quality soft solder paste according to EN ISO 9454-1-3114
• Flux residues are 100 % water soluble

• Steel brushes

Original spare part from ROTHENBERGER

• Original welding mirror from ROTHENBERGER
• The ball joint allows the welding mirror to be adjusted in all directions
• Flexible metal hose

• Athermal lenses according to DIN EN 169
• Glasses easily replaceable

• The high-quality brass non-return valves are type-tested according to EN 730-1 and ISO 5175-1.
• With gas non-return valve and flame arrester
• With thermal backflow preventer and dirt filter (No. 540360 and No. 540365)

• Protects the pressure gauge of the pressure reducer
• DIN standardised

• For nozzle sizes from 0.5 - 14 mm, 10 pieces
• Aluminium box for safekeeping

• Top quality according to ISO 3821 (formerly EN 559)
• With strong insert, durable and flexible loadable up to 20 bar
• Rubber material (no PVC), ready mounted with union nuts

High-quality steel bottle with stand and valve protection

High-quality steel bottle with stand and valve protection cap

Ideal adaptation of the length of the burner tubes to the respective working area

• Flexible and durable design
• Pressure-resistant for working pressures up to 20 bar (2 MPa)
• High-quality rubber hose according to ISO 3821