Drill Crown, High Speed Plus Natural Stone, G1/2", x 15mm
The HIGH SPEED Plus natural stone diamond core bit with G1/2 inch threaded mount is suitable for wet drilling. With a maximum working length of 125 mm, the diamond core bit can drill holes with a diameter of 67 mm. Extremely easy-cutting drill bit with a long service life thanks to the high segments with a high diamond content. The overturned core bit body reduces wear on the core bit. Drilling at the edge or at the edge of the material without damaging it is possible thanks to the use of diamond rings.
- Extremely fast cutting segments for hard materials Long service life despite soft diamond segments For drilling in material combinations (tiles & masonry) Overwound drill bit for exact rotation and therefore reduced wear Standard G1/2" connection, suitable for all ROTHENBERGER drill motors
High Speed Plus Naturstein, G1/2", D=15mm, NL=125mm
- Water submersible pump RODIAPUMP,conveyor. 5.5m
- Water extraction ring for RODIACUT 150 /131 DWS/170-C
- Water extraction ring for RODIACUT 250 /202/270-C
- Vacuum pump, RODIA-VAC, 230 volts with 10 litre safety tank
- Water pressure vessel, 10 litres, 2.5 metre hose compatible with gardena coupling
- Water connection hose for RODIADRILL/RODIACUT
Choose a variant
FF44815
High Speed Plus Naturstein, G1/2", D=15mm, NL=125mm
FF44867
High Speed Plus Naturstein, G1/2", D=67mm, NL=125mm
FF44865
High Speed Plus Naturstein, G1/2", D=65mm, NL=125mm
FF44860
High Speed Plus Naturstein, G1/2", D=60mm, NL=125mm
