Elmas matkap taç DX-HIGH SPEED PLUS, 1.1/4
Installers, service technicians and electricians combine their hand-operated or stationary core drill system with a suitable DX-High Speed Plus diamond drill bit for an easy production of core drillings in reinforced concrete (wet drilling) or masonry and lime sand brick (dry drilling) up to a depth of 400 mm without the need of an extension.
Choosen variant:Elmas matkap taç DX-HIGH SPEED PLUS, 1.1/4
Article number:FF44170
Choose another variant- Space welding: cold welding process according to cutting-edge bonding technology. Use of the complete diamond segment without waste due to a neutral zone PRISMACUT: Four drill nodules on the diamond segment improve the drill behaviour and provide optimal water cooling at the same time Exact rotation reduces wear Easy and secure first cut in hand-operated mode Fast drilling progress and extreme service life Space Welding and PRISMACUT
DX High Speed Plus, 1.1/4"UNC, D=172mm, NL=430mm
Choose a variant
Elmas matkap taç DX-HIGH SPEED PLUS, 1.1/4
FF44170
DX High Speed Plus, 1.1/4"UNC, D=172mm, NL=430mm
Dia-NTBK DX HSP-Set 82-112-132mm, 1.1/4"
19014
DX High Speed Plus, 1.1/4"UNC, D=82mm, NL=430mm
DX High Speed Plus, 1.1/4"UNC, D=112mm, NL=430mm
DX High Speed Plus, 1.1/4"UNC, D=132mm, NL=430mm
Elmas matkap taç DX-HIGH SPEED PLUS, 1.1/4
FF44300
DX High Speed Plus, 1.1/4"UNC, D=300mm, NL=430mm
Elmas matkap taç DX-HIGH SPEED PLUS, 1.1/4
FF44250
DX High Speed Plus, 1.1/4"UNC, D=250mm, NL=430mm
