Vŕtací systém RODIACUT 150 / RODIADRILL 200
The electric drill system consists of the drill stand RODIACUT and the drill motor RODIADRILL and is designed for the production of hand-operated and stationary core drillings with Ø 10-250 mm.
- Stationary wet drilling up to Ø 200 mm
- Stationary dry drilling up to Ø 225 mm
- Freehand wet drilling up to Ø 82 mm
- Freehand dry drilling up to Ø 250 mm
- One tool for all settings on the drill stand
- Quick-change plate for 2-fold drill motor mounting, standard (4-hole) or via Ø 60 mm clamping neck
- Tool-free motor mounting on the drill stand via dovetail mount and clamping device
- 2 levellers incl. 4 adjustment screws for quick and precise alignment of the drill stand
- Lightweight aluminum construction enables one-man operation of the drilling system
- Fully equipped drill stand incl. drill hole center indicator, drilling depth stop and measuring scale for easier use
- Integrated rubber transport wheels for easy transportation on the construction site and stairs
Vybraný variant
Kúpiť online
Nájdite predajcu vo svojom okolí
Vyberte si predajcu prostredníctvom
Popis produktu
HVAC installers, electricians, gardeners and chimney constructers can use the electric drill system, consisting of the drill stand RODIACUT 250 and drill motor RODIADRILL 200 or 500 for the production of hand-operated and stationary dry drillings in concrete and masonry.
Funkcie a vlastnosti
230 V striedavý prúd
Záručné služby RO SERVICE+
Rozsah dodávky
- RODIADRILL 200 drill motor
- Drill stand RODIACUT 150
- Open-end wrench SW19 DIN895
- Open-end wrench, SW24, DIN894
- Open-end wrench, SW36 DIN894
- Open-end wrench, SW41, DIN894
- Concrete fixing set
- Water hose + adaptor for plug-in and garden couplings
- Hammer drill SDS Plus, 15x160mm
- Tool bag
- Earplugs SaveRave in aluminum can
- Work gloves, lightly rubberized, 1 pair
- Safety goggles - UVEX
- Operating instructions RODIADRILL 160 + 200
- Operating instructions drill stand RODIACUT 150-250
Technické údaje
Najdôležitejšie fakty v skratke
Vstup | 2.700 W |
Výstup | 2.000 W |
Speed | 3.200 rpm |
Typ zástrčky | Zástrčka typu F (CEE 7/4) |
Ochranu | IP 20 |
Vyzdvihnutie vŕtacieho motora | R 1” GK-Kupplung |
Rýchlostná elektronika | Nie |
Typy korunky vrtáka | R 1” GK-Kupplung |
Hladina akustického tlaku s meračnou jednotkou | 92 dB(A) |
Hladina akustického výkonu (LwA) s jednotkou merania | 103 dB(A) |
Vŕtanie zdvihu s mernou jednotkou | 430 mm |
Vŕtanie betónu s meracej jednotky | 132 mm |
Vŕtanie plochy muriva s mernej jednotky | 162 mm |
Výkon s meracou jednotkou | 2.000 W |
Typ prúdu s mernej jednotky | 14 A |
Vibrácie s mernými jednotkami | 4,5 m/s² |