Coroană de găurit, High Speed Plus Natural Stone, G1/2", x 67mm
The HIGH SPEED Plus natural stone is designed for wet drilling.
- Extremely fast cutting segments for hard materials Long service life despite soft diamond segments For drilling in material combinations (tiles & masonry) Overwound drill bit for exact rotation and therefore reduced wear Standard G1/2" connection, suitable for all ROTHENBERGER drill motors
Alegeți varianta
Cumpărați online
Găsiți un dealer în apropierea dumneavoastră
Vă rugăm să selectați un dealer prin intermediul
Descrierea produsului
The HIGH SPEED Plus natural stone diamond core bit with G1/2 inch threaded mount is suitable for wet drilling. With a maximum working length of 125 mm, the diamond core bit can drill holes with a diameter of 67 mm. Extremely easy-cutting drill bit with a long service life thanks to the high segments with a high diamond content. The overturned core bit body reduces wear on the core bit. Drilling at the edge or at the edge of the material without damaging it is possible thanks to the use of diamond rings.
Funcții și caracteristici
Foraj umed
Domeniul de aplicare a livrării
- High Speed Plus Naturstein, G1/2", D=67mm, NL=125mm
Date tehnice
Cele mai importante fapte dintr-o privire
| Diameter (min-max) | 67 – 67 mm |
| Number of segments | 5 |
| Protection | IP 20 |
| Speed electronics | No |
| Thread pick-up | Standard |
| Tiles | No |
| Clinker | Yes |
| Mamor | Yes |
| Masonry | Yes |
| Granite | Yes |
| Concrete | Yes |
| Screed | No |
| Asphalt | Yes |
| Lime sandstone | No |
| Strongly reinforced concrete | Yes |
| Drilling stroke with unit of measurement | 125 mm |
| Useful length with unit of measurement | 125 mm |
| Drilling area concrete with unit of measurement | 67 mm |
| Drilling area masonry with unit of measurement | 67 mm |
| Segment dimension length x width x height with unit of measurement | 10 X 2 X 9 mm |