We use cookies to make your experience better.
To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies.
Soldar
Cartridge soft soldering
Cylinder soft soldering
Cylinder brazing
Electric soft soldering
Oxy-fuel welding
Consumables
Propane accessories
Soldering & welding accessories
Cartridge brazing
-
Cartridge soft soldering
-
Soft-soldering device ROFIRE PIEZO Multigas set, 7/16"-EU
0,00 US$- Piezo ignition for comfortable working
- Fine adjustment valve for precise adjustment of the flame
- Torch with integrated support bracket for a secure stand
- At the end of the work, the Multigas 300 cartridge can be easily disconnected from the soldering torch, the valve completely seals the cartridge.
-
Gas cartridge Multigas 300, 7/16"-EU
0,00 US$- High flame temperatures up to 1,900° C for versatile applications
- After finishing the work, the cartridge can be easily separated from the soldering burner, the cartridge valve seals completely.
-
Gas cartridge Supergas C 200 TSS
0,00 US$- Plug-in cartridge with butane-propane gas mixture for flame temperatures up to 1,800° C
- With top safe system (TSS) - integrated leak limiter according to EN 417:2012 to reduce the gas leakage in case of short term separation of burner and pierced gas cartridge
-
Gas cartridge Multigas 110, 7/16"
0,00 US$- Compact cartridge with flame temperatures up to 2,100° C specially for MULTI MOBILE soft soldering device with copper piston
- Enables soft soldering sheet metal and roofing services without hose
-
-
Cylinder soft soldering
-
Propane soft-soldering kit MULTI 300
0,00 US$- Propane handle with durable and heat-insulating wooden handle
- Adjustable air / rotary valve for adjusting a particularly fine flame
- Rotatable hose coupling, no twisting
-
Heating burner ROOFING set
0,00 US$- 63 mm high-performance burner with long service life due to chrome plating and reinforced edges
- Flame stabiliser for efficient work even in adverse weather conditions
- Burner support for a secure stand included
-
-
Cylinder brazing
-
Brazing & soldering device TURBOPROP
0,00 US$- High flame temperature up to 2,200° C due to turbine effect with increased air-oxygen suction capacity and 4 to 5-fold flame chamber
- Quick coupling for fast burner exchange without tools
- Pilot flame for reduced gas consumption due to a smooth-running economy valve
-
Brazing handle AIRAC
0,00 US$- High flame temperature of up to 2,350° C thanks to turbine effect
- Concentrated, pointed flame for precise and quick work
- Pilot flame for reduced gas consumption due to a smooth-running economy valve
- Easy to transport due to light weight (one-cylinder system, no extra oxygen cylinder necessary)
-
Brazing & soldering device AIRPROP
0,00 US$- High flame temperature of up to 1.900° C thanks to turbine effect with increased air and oxygen intake
- Quick coupling for fast burner exchange without tools
- Pilot flame for reduced gas consumption due to a smooth-running economy valve
-
Soldering torch SUPER FIRE 2
0,00 US$- The UK's No.1 Best Selling Torch.
- Ideal for soft soldering and brazing.
- Piezo ignition for instant flame and Guaranteed 360° Anti Flare.
- Servicable and replacement parts available.
- Suitable for MAP/Pro™ and Propane.
- Can be fitted with Cool Tip-with filter jet, for safer burning.
- Made in USA.
-
Soldering mat
0,00 US$- Protects surfaces when soldering up to 1000°C
- Gold Silica 2-Ply reversible with wire reinforced kevlar thread.
- With added Ecomab™ high temperature paper infil.
- Contains NO Asbestos.
- Made in Britain.
-
Deburring file strips
0,00 US$- Waterproof and double sided.
- For removing paint and oxides from copper pipe before soldering.
- Can be used to de-bur plastic pipes.
- Will not clog and is longer lasting than steel wool.
-
High-temperature soldering mat
0,00 US$- Maximum working temperature of 1260°C
- Gold Vermiculite coating with wire reinforced kevlar thread.
- Ecomab™ body soluble Class "0" Infil.
- Contains NO Asbestos.
- Made in Britain.
-
-
Electric soft soldering
-
Electro-fusion welding device ROTHERM 2000
0,00 US$- Soft soldering without open flame - no fire watch needed
- Large working radius thanks to 4m solder gun cable and 2m power cable, also for working under ceilings
- Compact design for a comfortable transport without gas bottles
-
Electro-fusion welding device ROTHERM 2000 set
0,00 US$- Soft soldering without open flame - no fire watch needed
- Large working radius thanks to 4m solder gun cable and 2m power cable, also for working under ceilings
- Compact design for a comfortable transport without gas bottles
-
Rod electrode for ROTHERM 2000
0,00 US$- Pointed design especially suited for working close to walls and in confined spaces
- Warming the soft soldering joint without flame - no fire watch needed
-
-
Oxy-fuel welding
-
Portable gas-welding device ALLGAS 2000 PS
0,00 US$- Ideal for mobile soldering thanks to a compact frame with oxy-acetylene flame
- Small propane and oxygen bottles can easily be refilled
- Flexible insert for the compact handle, for working in confined spaces
- Focused flame for precise work
-
Mobile soldering & welding device ALLGAS 2000 set
0,00 US$- Ideal for mobile soldering thanks to a compact frame with oxy-acetylene flame
- Flexible insert for the compact handle, for working in confined spaces
- Focused flame for precise work
-
Brazing handle ALLGAS 2000 without burner
0,00 US$- Focused flame for precise work
- Flexible insert for the compact handle optionally available for working in confined spaces
-
Bottle transport trolley
0,00 US$- Mobile transport trolley with adjustable telescopic handle for 5 and 10 l gas bottles
- Coupling for disposable Maxigas 400 cartridges for use with RE 17 three-gas system
-
Three-gas welding system RE 17 AMS 5/5
0,00 US$- Robust RE 17 three-gas welding system for extreme requirements
- Universal application possibilities through wide range of welding attachments, also with flexible burner inserts for confined spaces
- Three-gas system consisting of acetylene, oxygen, and Maxigas 400: Welding and cutting is performed with acetylene and oxygen, brazing is performed with Maxigas 400 and oxygen
-
Three-gas welding system RE 17 AMS 5 + 10, without bottles
0,00 US$- Robust RE 17 three-gas welding system for extreme requirements
- Universal application possibilities through wide range of welding attachments, also with flexible burner inserts for confined spaces
- Three-gas system consisting of acetylene, oxygen, and Maxigas 400: Welding and cutting is performed with acetylene and oxygen, brazing is performed with Maxigas 400 and oxygen
-
Gas-welding device ROXY 400 L set
0,00 US$- High flame temperatures up to 3,100° C for brazing and many other application areas
- Powerful, focused flame for precise work
- Included safety devices reliably prevent flame flashbacks
-
Mobile brazing device ALLGAS Mobile Pro
0,00 US$- Under 6 kg including cartridges: Ideal for mobile soldering thanks to a compact frame with oxy-acetylene flame
- Flexible insert for the compact handle, for working in confined spaces
- High quality safety equipment for both cartridges to prevent flame flashbacks
- Focused flame for precise work
-
-
Consumables
-
Hard solder ROLOT, 500 mm
0,00 US$- Excellent quality suitable for plumbing, electrical industry, refrigeration and air-conditioning according to the DVGW worksheets GW 2 and GW 7
- Very good melt and flow properties thanks to the uniform distribution of alloy elements
- All ROTHENBERGER ROLOT fitting solders are cadmium free
-
-
Propane accessories
-
-
Propane handle for AIRPROP and TURBOPROP
0,00 US$- Available with quick-release coupling for replacement of torches without tools or M 14 x 1 screw connection
- Pilot flame for reduced gas consumption due to a smooth-running economy valve
-
Propane regulator
0,00 US$- Solid brass version for propane bottles up to 11 kg
- Flow capacity of 8 kg/h
-
-
Soldering & welding accessories
-
Small propane cylinder
0,00 US$- Can be refilled with the ROTHENBERGER propane refilling bend
- With sounding pipe to prevent overfilling
- Tested steel cylinder with protective carrying handle for 0.425 kg propane filling
-
Oxygen refilling bend G 3/4" RH
0,00 US$- High-quality, chrome-plated version with pressure resistance up to 200 bar
-
Flame protection mat
0,00 US$- Flame retardant and heat resistant up to 840° C
- Permanent heat resistance up to 700° C during direct exposure to flames and molten slag
- Good formability, long service life, asbestos-free, ceramic-free and no health hazard
-
Oxygen pressure reducer
0,00 US$- Robust pressed brass construction with pressure gauge according to ISO 5171
- With shut-off and safety valve for a high safety standard
-
Oxygen steel cylinder
0,00 US$- Mobile design, ideally suited for use with gas welding and brazing devices of the ROTHENBERGER ALLGAS Mobile or ROXY Kit series
-
Internal brushes for copper pipes
0,00 US$- Durable brushes with sturdy plastic handle for efficient removal of oxide layer before soldering
-
Cleaning pads ROVLIES
0,00 US$- Reduction of corrosion damage
- No metallic abrasion, wet and dry use
- Solvent-resistant and elastic
-
Regulating valve 7/16"-EU
0,00 US$- Durable brass design with precision valve and gasket for connecting a gas cartridge to a hose
-
-
Cartridge brazing
-
Gas cartridge Maxigas 400, 7/16"-EU
0,00 US$- Very high flame temperatures up to 2,200° C for versatile use
- After finishing the work, the cartridge can be easily separated from the soldering burner, the cartridge valve seals completely.
-
Propane gas cartridge
0,00 US$- Flame temperature of 1995°C.
- Ideal for soft soldering and some brazing tasks.
- All cylinders are non-refillable , batch coded for traceability and compliant with EN 12205.
- Cylinders can be vented after use with vent key (No.35537) then disposed of as scrap steel.
- Made in USA
-
MAPP gas cartridge
0,00 US$- Increased flame temperature of 2300°C.
- Suitable for a wide range of soldering and brazing tasks.
- Ideal for silver solder brazing of refrigeration pipework.
- All cylinders are non-refillable, batch coded for traceability and compliant with EN 12205.
- Cylinders can be vented after use with vent key (No.35537) then disposed of as scrap steel.
- Made in USA
-
-
Torch extension hose
0,00 US$- Allows extended reach, 1.5m (59") with reduced fatigue.
- Ideal for torch work in more confined spaces.
- Suitable for: MAP/Pro™ & Propane.
- Suitable for: SuperFire 2™ & QuickFire™, Rofire Global and Swivel Pro Torches.
- Supplied with handy hanging hook for the workplace or belt loop.
-
Swirl flame burner tip & orifice kit
0,00 US$- Produces a finer flame for more intricate work
- Also known as a "Cool Tip".
-
Turbine flame burner
0,00 US$- Generates maximum heat output if selected and can also be controlled to allow cooler working if required.
- Easy to fit and replace when necissary.
-
Soldering torch QUICK FIRE
0,00 US$- Piezo ignition for instant flame.
- Guaranteed 360° Anti-Flare.
- Servicable and replacement parts available.
- Suitable for MAP/Pro™ and Propane.
- Made in USA.
-
Trigger torch
0,00 US$- Piezo ignition for instant flame.
- 1.5 meter heavy duty hose for great reach and working range.
- Great for soldering in confined spaces.
- Fine flame adjustment and constant flame option.
- Guaranteed Anti Flare.
- Suitable for both MAP/Pro™ and Propane.
- Made in USA.
-
Cooks torch
0,00 US$- Piezo ignition for instant flame.
- Easy refilling using Rothenberger Butane/Propane (No.35840)
- Childproof safety lock and safety stand.
- High heat Turbo Flame.
-
Soldering unit SUPER FIRE 3 HOT BOX, 7/16"-EU
0,00 US$- Ideal service cases - up to 2.5 hours of brazing with only one MAPP cartridge possible
- Powerful cyclone burner for efficient brazing up to Ø 28 mm
- ,,Twist ,N' Load" system (5 different burner inserts) - fast replacing of the burner with only one movement
- Piezo ignition and safety lock for comfortable and economical work
-
Soldering unit SUPER FIRE 4 HOT BOX, 7/16"-EU
0,00 US$- Ideal service cases - up to 2.5 hours of brazing with only one MAPP cartridge possible
- Powerful cyclone burner for efficient brazing up to Ø 28 mm
- ,,Twist ,N' Load" system (5 different burner inserts) - fast replacing of the burner with only one movement
- Piezo ignition and safety lock for comfortable and economical work
- Longer handle for an even more stable positioning on the gas cartridge
-
Soldering unit SUPER FIRE 4
0,00 US$- ,,Twist ,N' Load" system (5 different burner inserts) - fast replacing of the burner with only one movement
- Powerful cyclone burner for efficient brazing up to Ø 28 mm
- Ideal with MAPP gas: Brazing of up to 2.5 hours with only one cartridge possible
- Piezo ignition and safety lock for comfortable and economical work
- Longer handle for an even more stable positioning on the gas cartridge
-
Soldering unit POWER FIRE Compact
0,00 US$- Powerful cyclone burner for efficient brazing up to Ø 22 mm
- Ideal with MAPP gas: Brazing of up to 2.5 hours with only one cartridge possible
- Piezo ignition for comfortable and economical work
-
Soldering unit SUPER FIRE 3
0,00 US$- ,,Twist ,N' Load" system (5 different burner inserts) - fast replacing of the burner with only one movement
- Powerful cyclone burner for efficient brazing up to Ø 28 mm
- Ideal with MAPP gas: Brazing of up to 2.5 hours with only one cartridge possible
- Piezo ignition and safety lock for comfortable and economical work
-
Handle for soldering unit SUPER FIRE 3
0,00 US$- ,,Twist ,N' Load" system (5 different burner inserts) - fast replacing of the burner with only one movement
- Powerful cyclone burner for efficient brazing up to Ø 28 mm
- Ideal with MAPP gas: Brazing of up to 2.5 hours with only one cartridge possible
- Piezo ignition and safety lock for comfortable and economical work
-
Cyclone burner for soldering unit SUPER FIRE 3 and SUPER FIRE 4
0,00 US$- Cyclone effect: Efficient swirl flame for smooth, fast, and economical heating of the pipe
- Working temperature up to 950° C for brazing pipes up to Ø 28 mm (with flame reflector)
- "Twist, N' load" system - fast mounting and replacing the burner with only one movement
-
Hot air burner for soldering unit SUPER FIRE 3 and SUPER FIRE 4
0,00 US$- Enclosed, wind-stable construction
- 400° C working temperature for reliable shrinking work without burning the shrink material
- "Twist, N' load" system - fast mounting and replacing the burner with only one movement
-
Soldering uni SUPER FIRE 3 MAPP set
0,00 US$- ,,Twist ,N' Load" system (5 different burner inserts) - fast replacing of the burner with only one movement
- Powerful cyclone burner for efficient brazing up to Ø 28 mm
- Ideal with MAPP gas: Brazing of up to 2.5 hours with only one cartridge possible
- Piezo ignition and safety lock for comfortable and economical work
-
A ROTHENBERGER dispõe de uma ampla gama para soldadura, brasagem forte e equipamentos de soldadura de acordo com as necessidades do instalador.