CONJUNTO ROWELD P 250A, 230V
The P 250A for use on the construction site and in the workshop. It is particularly suitable for sanitary installations in the drainage area and for chimney pipe rehabilitation with PVDF pipes.
- Flexible for difficult positions due to removable heating element
- Protection against unintentional starting and jumping out of the milling device
- Milling possible on one and both sides
- Torsionally stiff, for minimum drag pressure and low-loss power transmission
- Precise welding force adjustment due to clear force scale
- Safe, torsionally rigid transfer of welding forces
- Always available stable work table
Variante escolhida
Comprar online
Encontrar um revendedor perto de si
Selecione um revendedor através do
Descrição do produto
The P 250A plastic pipe welding machine is the all-rounder on the construction site and in the workshop. It is particularly suitable for sanitary installations in the drainage area as well as for chimney pipe rehabilitation with PVDF pipes.
Funções e caraterísticas
110 V CA
115 V CA
230 V CA
230 V CA
Âmbito da entrega
- ROWELD Grundmaschine P250A mit Planhobel
- Heizelement P250A
- Grundspannbackenset 250 mm
- Grundspannbackenset 160 mm
- Reduktionsspanneinsatz 40 mm
- Reduktionsspanneinsatz 50 mm
- Reduktionsspanneinsatz 56 mm
- Reduktionsspanneinsatz 63 mm
- Reduktionsspanneinsatz 75 mm
- Reduktionsspanneinsatz 90 mm
- Reduktionsspanneinsatz 110 mm
- Reduktionsspanneinsatz 125 mm
- Reduktionsspanneinsatz 140 mm
- Reduktionsspanneinsatz 180 mm
- Reduktionsspanneinsatz 200 mm
- Reduktionsspanneinsatz 225 mm
- Stützgabeleinsatz 40/125 mm
- Stützgabeleinsatz 50/110 mm
- Stützgabeleinsatz 56/90 mm
- Stützgabeleinsatz 63/75 mm
- Stützgabeleinsatz 140 mm
- Stützgabeleinsatz 180 mm
- Stützgabeleinsatz 200 mm
- Stützgabeleinsatz 225 mm
- Sechskantschlüssel SW 6 mm
- Sechskantschlüssel SW 8 mm
- Gabelschlüssel SW 17 mm
- Datenscheibe
- Bedienungsanleitung
- Serviceheft
Dados técnicos
Os factos mais importantes em resumo
| Potência de entrada (min-max) | 0 – 1,500 W |
| Tensão (min-max) | 230 V |
| Diâmetro da área de trabalho mm (min-max) | 40 - 250 mm |
| Área de trabalho Temperatura (min-max) | 160 – 285 °C |
| Matrialias adequadas | PE, PP, PVDF |
| Tipo de plugue de alimentação | Tipo de plugue F (CEE 7/4) |
| Documentação | Não |
| Frequência da rede com unidade de medição | 50/60 Hz |