Testa portapettini, Standard, BSPT R/NPT,1/2-2"
In connection with a threading machine ROPOWER 50 R and all SUPERTRONIC 2-4 SE, a pipe thread according to BSPT right, according to EN 10226 or NPT thread, according to ASME B1.20.1 on steel pipes of the standard EN 10255 M-H can be created with the die head and the optional dies. The thread cutting range is from R 1/2" to R 2".
Variante choisie:Testa portapettini, Standard, BSPT R/NPT,1/2-2"
Numéro d'article:56156
Choisir une autre variante- Regolazione continua da 1/2" a 2".
- Semplice e rapido cambio dei pettini
- Compatibili con ROPOWER 50 R e SUPERTRONIC 2-4 SE
- Lubrificazione induttiva per un costante raffreddamento dei pettini e una maggiore durata
Gewindeschneidkopf, BSPT R, NPT, 1/2-2"
- SUPER CUT-Set, BSPT R, 3/8-1" in valigetta
- Filiera manuale, SUPER CUT, 3/8 - 2"
- Filiera manuale, SUPER CUT, 1/2 - 1.1/4", BSPT R
- Set SUPER CUT, BSPT R, 1/2-1.1/4"
- SUPER CUT, NPT 3/8-2" in cassetta
- SUPER CUT-Set, NPT 1/2-1.1/4", in valigetta
- SUPER CUT, NPT 1/2-1" in cassetta
- SUPER CUT Set, BSPT R, 3/8-1/2-3/4-1"
- SUPER CUT-Set, BSPT R, 1/2 - 1" in valigetta
- SUPER CUT-Set, BSPT R, 3/8 - 1.1/4" in valigetta
- Filiera manuale, SUPER CUT, 1/2 - 2"
- SUPER CUT-Set, BSPT R, 1-2", in valigetta
- SUPER CUT-Set, BSPT R, 1/2-1" in valigetta
- Filiera da banco ROPOWER 50, 1/4 - 2"
- SUPER CUT NPT 1/2-2" in valigetta
Choisissez une variante
Testa portapettini, Standard, BSPT R/NPT,1/2-2"
56156
Gewindeschneidkopf, BSPT R, NPT, 1/2-2"
Testa portapettini, Standard, BSPT, 2.1/2 - 3"
56104
Gewindeschneidkopf, BSPT R, 2-3", NPT 2.1/2-3"
Testa portapettini Standard, NPT, 1/4-3/8"
56118
Gewindeschneidkopf, NPT, 1/4-3/8"
Testa portapettini, metrica, 10-24 mm
56133
Gewindeschneidkopf, 10-24mm